Page 12 - 20 Xerox Document Centre Reference GuideRelocating your Document CentreMoving your Document Centre to a new location on the same flooror a different floor through elevator can be handled withoutassistance from Xerox. Contact Xerox to arrange a move to adifferent building.Use the following procedure to relocate a Document Centre:l Power-off the machine and disconnect the telephone cord,power cord and any network connections.l Unlock the right wheel casters by pressing the lever on eachwheel up. To enable better steering and avoid tipping, themachine is designed to be moved left to right with the rightcasters in an unlocked position. Do not attempt to unlock theleft casters.l Pushing on the right side of the machine (the side with theswivel casters) will make it easier to steer it. Do not pushagainst the Document Feeder as this may damage themachine.l Ensure that the minimum space requirements diagrammedon the following page and that the ozone requirementsdetailed on page 1-4 are met. The dimensions assume amoveable installation (carpet no deeper than 0.25 inch or 7mm). The wall outlet must be installed near the equipmentand be easily accessible.l Plug in the phone line and the power cord and reestablishthe network connection if necessary. Power on the machine.Reenter the machine telephone number if it has changed andinform the Welcome Center of the new number.l Lock the casters in position by pressing the caster wheellever down.
