Xerox Document Centre Reference Guide Page 14 - 314. MachineMaintenancePower Off ProceduresThere are two non-emergency methods used to power off theDocument Centre.Preferred MethodPressing the symbol to the left or towards the front of themachine will turn the power off. A confirmation screen will appearasking you to select Quick Power Off or Power Saver Mode.If Quick Power Off is selected and confirmed, the machine willbegin a controlled power down sequence.If there are any jobs in the queue, a second pop-up screen will appearwarning that jobs in the queue will be deleted if the machine ispowered off. Confirmation of this screen will result in the deletionof any jobs in the queue during the power down sequence.If Power Saver Mode is selected and confirmed, the machine willimmediately enter Low Power Mode. Refer to the section aboutENERGY STAR® in Chapter 12 for more information.If the machine is in the Low Power Mode, you must press a buttonon the User Interface panel or the Touch Screen to activate themachine in order to power the machine off, using the white powerswitch .The white button is disabled when the machine is in Low PowerMode.NOTE Using the white power switch is the preferred method of poweringdown the machine.PowerOFFswitch
