Page 9 - 2 Xerox Document Centre Reference GuideSystem Management Tools OverviewThe System Management Tools allow you to customize, andmaintain, the Document Centre. This collection is commonly knownsimply as Tools. Using Tools, you can:l Change the factory settings or defaults for a variety offeatures; for example, tone loudness, specific programmingfeatures, and Power Saver Administration.l Perform basic maintenance tasks; for example, adjustingscreen brightness or resetting the software.l Perform a variety of system tests, typically with assistancefrom Xerox.To enter Tools, press the Access button, located on the upper right-hand corner of the User Interface, and enter the password of 1111.If you have an ST Model, Select Go to Tools. On a DC model withAuditron active, press Tools Pathway after you enter the password.On a DC model without an active Auditron you will immediatelyaccess the Tools functions after you enter the password and pressenter.NOTE The factory preset password for Tools is 1111. It is stronglyrecommended that you change the password. Refer to page 10-14to learn how to change the Tools password.The following tables describe the Tools screens and list referencepoints within this document for additional information.User InterfacePress here to access ToolsDefault password 1111
