Page 15 - 6 Xerox Document Centre Reference GuideTroubleshooting TipsProblem Symptom RecommendationPowerThe machine will notpower onl Check to see that the machine is not in LowPower Mode as indicated by the green lighton the User Interface.l Push the white power button to the ONposition.l Check to see if the power cord is correctlyinstalled.l Examine the circuit breaker for the line tosee if the AC outlet is receiving voltage.PaperHandlingA document set will notfeed through the DocumentFeederl Ensure that all staples or clips have beenremoved from the originals.l Check to see if the Document Feeder isoverloaded. The 460/470 can hold 75sheets while the 240/255/265 can hold 50sheets of 20 lb. Use Build Job if you havemore originals than this.l Check to see if the document set is fullyinserted into the Document Feeder.l Ensure that the edge guides are adjusted totouch the sides of the originals.l Ensure that the Feed Roll Cartridge iscorrectly engaged. Reseat if necessary.l Check for obstructions in the DocumentFeeder.l Ensure that the Document Feeder cover isclosed.l Check that the machine is not in diagnosticsmode as indicated by a message on the UserInterface.