Page 3 - 12 Xerox Document Centre Reference GuideFinisherThe Finisher consists of the Top Tray and the Stacker Tray.The Top Tray holds sheets that are purged from the system or up to250 copies of small paper that cannot be stapled. It can be set as adestination tray for non-stapled jobs.The Main Tray is the output tray for all other copies. It has twostaplers, each with a 5000 staple cartridge, that can staple sheetsranging in size from 6.7 x 8 inch to 12 x 18 inch of 16 to 110 lb.stock.To ensure that the stapling of thin sets is satisfactory, the machinestops after producing between 30 and 50 sets of 2 -15 sheets to allowyou to unload the machine. It automatically resumes printing after itis unloaded or after one minute. These options are adjustable inTools. Refer to page 9-33 for more information.Some versions of hardware may not require these options.NOTE Removing output while the machine is running may producefinished sets that are incorrectly stapled. To unload the Finisherwhile it is printing, Press the Finisher Pause button and wait for thetray to lower. After you unload, press the button again to continue.Top TrayMain TrayPress the FinisherPause Button tounload StackerTray during a printrun
