Xerox Document Centre Reference Guide Page 9 - 319. ToolsSystem ToolsContention ManagementThis feature allows you to control whether copy jobs or print jobshave printing priority when entering the job queue. Options such aspromote or interrupt are not affected by this feature. This featureoption is not available on the DC model.PriorityThe Priority button allows you to set the relative priority for copyand print jobs. The lower the number the higher the priority. Thedefault setting allows copy jobs to take priority over print jobs. Thisallows the user who is standing at the machine making a copy togenerally receive their output before a print job.To change the priority setting, use the scroll bars to ensure the typeof job (copy or Print) you want to print first has the lower number.The wide range (1 - 16) is reserved for future enhancements.A print job will be completed before the copy job begins to printunless the Interrupt button is selected.NOTE When copy jobs have priority, and several small print jobs areformatted and waiting to be printed, the scanned copy job willusually wait until a small image buffer (approximately 5 images)empties. Then the copy job will print.First In/First OutJobs are scheduled to print based on their entry into the Job Queue.This is regardless of whether they are copy or print jobs.Tools Screen 1System Settings 1MoreHow to get hereSystem Settings 2MoreSystem SettingsSystem Settings 3ContentionManagement
