Xerox Document Centre Reference Guide Page 5 - 55. Fax (OptionalFeature)5. Fax (OptionalFeature)Sending a Fax1. Load your originals.If using the Document Feeder, load face up. The DocumentCentre has an image rotation feature that enables you to feedoriginals Long Edge Feed even if the destination Fax can onlyprint Short Edge Feed.2. Press the Fax button to display the Fax screen.3. If Faxing 2-sided originals, touch the 2-sided button.4. Enter the fax number using the numeric keypad.To send a fax to more than one number, press the Add to Sendlist button then enter the next telephone number. Repeat until allthe numbers have been added.Press the Send List button to view the list of destination phonenumbers.You can also use the Phone List to add preprogrammed numbersto the Send List. Refer to page 5-10.Use the Dial Pause button on the control panel to add a pausebetween characters if necessary.Add other Dialing Characters as necessary. Refer to page 5-7.5. Press Start.The Document Centre will scan the originals and store theelectronic files in the Fax Respository.Confirmation Sheets and Transmission sheets. If enabled byyour Machine Administrator, the machine will print aConfirmation Sheet when the job is successfully transferred tothe Fax respository. When the job is received by the distantstation and the Network Fax software has enabled transmissionreports, a transmission report will be printed.6. Remove your original documents.
