Page 9 - 30 Xerox Document Centre Reference GuideImage RotationWhen the orientation of the originals and the output paper does notmatch, this feature allows the scanned original image to be rotatedautomatically 90 degrees in order to fit on the output paper. Thisfeature only applies to copy jobs.If either Auto% or Auto Paper are selected, all the documents mustbe scanned, and the digital images rotated before printing will start,which requires approximately one second per image rotated. (The 2-sided copy option, Rotate Side 2 is not affected by these ImageRotation settings).By rotating the image 90 degrees, a single orientation of loadedpaper stock can be used for multiple job types. For example:l Reduce SEF 8.5 x 14 inch or 11 x 17 inch originals and rotatethe reduced image 90 degrees onto 8.5 x 11 inch LEF paper.This eliminates the need to load and use SEF 8.5 x 11 inchpaper, which runs at half the rate of LEF paper.l Enlarge LEF 8.5 x 11 inch originals to SEF 11 x 17 inch paper.This allows the originals to be loaded in the usual LEForientation, whether copied at 100% or enlarged beyond 100%.Auto% will reduce or enlarge the original image automatically sothat it will fit on the selected copy paper.Auto Paper automatically selects the best paper size for the originalbeing copied.Tools Screen 1System SettingMoreHow to get hereSystem Setting(On an ST model)(On a DC model)Tools Screen 1System Settings 1MoreSystem SettingSystem Settings 2MoreSystem Settings 3Image RotationSystem Settings 2Image Rotation
