Xerox Document Centre 240 Reference Manual

Also see for 255 DC: User guide User guide Information manual

Contents

Xerox Document Centre 240 Reference Manual Manual pdf 56 page image

Page 4 - 8 Xerox Document Centre Reference GuideCustom SettingChoose Custom to adjust the height (Y) and the width (X)dimensions for reduction or enlargement independently. Youroutput will NOT be reduced or enlarged proportionally.100%: Produces an image the same size as your original document.Auto%: When Auto% is used in the Custom Reduce / Enlargescreen, it automatically reduces or enlarges the image on your outputbased on the size of the original and the size of the output stock. Itwill stretch the original image to fill the output stock, using differentpercentages in the X and Y directions if necessary.X 78%, Y 100% preselect: This selection automatically reducesthe X dimension of the output to 78% (width). Y remains the same(height) dimension. This selection enables you to reduce an 8.5 x 14inch SEF original to fill an 8.5 x 11 inch paper. The percentages inthis section can be adjusted by your Machine Administrator.X, Y adjustments: You can also adjust the X and Y dimensionsmanually in 1% increments by using the scroll arrows. Touch theupper scroll arrow to increase a dimension.You can also enter a percentage by touching the X: and Y: boxes andentering the percentage from the keypad.