Page 4 - 16 Xerox Document Centre Reference GuideBound OriginalsThis feature is used to copy pages from books or other bounddocuments onto separate single-sided or double-sided pages. TheMachine Administrator can add additional scanning options for theBoth Pages selection giving you the choice of scanning left to rightor right to left.To use this feature:1. Open the Document Glass cover. The cover must remain openduring copying.2. Place the book face down anywhere on the Document Glass,with the bottom edge of the bound document towards the frontof the machine.l To avoid skewing the book and therefore the copy, alignwith the Book Binding Mark on the front edge of the glass.l When an original is placed on the front edge of the glass,any information within 0.25 inches of the bottom edge of anoriginal placed will be deleted on the copy. Most books donot have information within this area. If this is not the case,place the original anywhere on the glass at least 0.25 inchesaway from the front edge.l To compensate for books having dark borders or edges,refer to page 4-21 for additional information.3. Select Left Page, Right Page, or Both Pages.4. If necessary, apply light pressure in the center of the book toflatten it in order to minimize distortion of the image.5. Press the Start button. Remember, as this is an automatic featurefrom the glass, the machine will make multiple scans. Do notremove the original until all scans are completed.
