Page 14 - 10 Xerox Document Centre Reference GuideCleaning the MachineCAUTION To avoid damage to the machine, do not pour or spray water orcleaner directly into the Document Centre. Do not use any abrasivecleaners to clean the Document Centre. Do not force cloth or towelsinto confined areas or force parts open.Document GlassMaintaining Optimum PerformanceThe Document Centre scanner is one of the most sensitive in theindustry and one of the reasons you can produce copies withunparalleled image quality. In order to maintain this level of imagequality the Document Glass must be cleaned.Document Feeder Scan AreaSpots and specks in the Document Feeder Scan Area can show-upas streaks on copies made when the Document Feeder is used.Main Document GlassSpecks and dirt can also cause image detection problems when usingthe main glass. The scanner may interpret contamination as part ofthe image during a pre-scan and produce faulty copies.Recommended Cleaning materials:l Soft, lint-free cleaning towels.l Xerox Platen Glass Lens and Mirror Cleaner, part number8R3669.Apply a non-abrasive cleaner to a towel rather than to the glasssurface. Wipe the entire glass, ensuring that it is free of dirt andsmudges. Wipe away any residue from the cleaner.Document Feeder Scan Area Ensureat least 1 inch immediately to right ofthe black plastic ramp is cleaned.Main Area,Clean entirearea.
