Page 9 - 12 Xerox Document Centre Reference GuideTray ManagementThere are several selections on this screen.l Tray Settings allows you to program trays as Fully Adjustable,Dedicated, or on a DC model, Size Only. You can also set traypriorities and enable Auto Selection.l Stock Settings allows you to set the stock size, color, or typefor Dedicated trays only.l Default Stock is where you set the stock type and color.l Standard Size Required is used to control machine operationwhen Auto Paper is used to select a paper size. If this feature isOn, only standard size papers can be selected automaticallywhen Auto Paper is selected. If this feature is Off, any paper onwhich the entire image will fit can be used.l Paper Substitution allows the automatic substitution of USand metric equivalent paper sizes for network print jobs. Forexample, 8.5 x 11 inch paper will be automatically substitutedfor A4 paper when 8.5 x 11 inch paper is not available in themachine.Some image loss may occur. Refer to page 9-17 for moreinformation. This feature is not available on the DC models.NOTE In ST models, in order for the system to print error andconfiguration reports correctly, at least one tray must be loadedwith 8.5 x 11 inch paper and Auto Selection should be enabled.Tools Screen 1System Settings 1TrayHow to get hereSystem SettingsManagement
