Square Fold featureThe Square Fold feature can be selected/accessed from your computer print driver, themachine UI, or from the print server.NoteThe Square Fold feature is available only when your machine is connected to both afinisher with a booklet maker and the SquareFold Trimmer Module.NoteThe term Book Pressing is used synonymously with the terms Square Fold or SquareFolding.Square fold optionsThe Square Fold (Book Pressing) feature can be switched on or off based on userpreference. When the feature is switched on, you can select one of five options dependingon your requirements for the finished booklet job.NoteFor the remainder of this section, the SquareFold Trimmer Module Control Panel andthe machine UI screens are shown. The individual print server and print driver screensare not shown. The descriptions given for each of the Square Fold options are applicablefor network print jobs and apply to any print server/print driver connected to the machine.1. Square Fold/Book Pressing options on the machine UI; the illustration shown is arepresentation only. The actual images on the machine UI may vary depending onthe machine to which it is connected.2. SquareFold Trimmer Module control panel18-5Xerox® Color C75 PressUser GuideSquareFold Trimmer Module
