• On: Select this option to have the Next Original option highlighted on the copyscreen when scanning is in process.• Off: Select this option to have the Last Original option highlighted on the copyscreen the scanning process is in process.4. Select Save to save your choice.This feature is available only when Collated is selected in the Copy Output screen.5. Close the document feeder.6. Program the job with the desired features/options, including:• Reduce/Enlarge• Paper Supply• Output Color• Copy Output• 2-Sided Copying• Original Type• Lighten/Darken7. Enter the quantity.8. Press Start.9. When you are finished scanning all the documents, select Last Original to completethe job.10. Retrieve the copies from the output area.Delete Outside/Delete InsideThis feature allows you to specify the area for omission or deletion and then to copythat area. Keep the following in mind when using this feature:• When specifying multiple areas to delete, it is also possible to overlap and specify anarea.• When selecting Reduce/Enlarge, the areas are reduced or enlarged by interlockingmagnification.1. Press the Services button on the control panel.By default, pressing the Services button will cause the Copy screen to appear.2. Select the Job Assembly tab.3. Select Delete Outside/Delete Inside.The Delete Outside/Delete Inside screen is displayed. By default, Off is selected.4. Select either Delete Outside or Delete Inside.5. If the originals are 2-sided, select the applicable option:• Both Sides• Side 1 Only• Side 2 Only6. Select the Area 1 button.5-31Xerox® Color C75 PressUser GuideCopy
