2. Hold the R1 lever of the staple cartridge. Hold the orange lever and pull the cartridgetoward you to remove it. Dispose of the staple cartridge according to the instructionsin the new staple cartridge box.3. Insert the staple cartridge while gripping the orange lever until you hear it click intoplace. Close the front cover of the finisher.The use of staple cartridges not recommended by Xerox may impair quality andperformance. Use only staple cartridges recommended for the machine.Staple Jam1. Ensure that the machine has stopped before opening the front cover of the finisher.2. Grip the Handle R1 of the staple cartridge holder and pull out the holder to the righttoward you.3. Remove the staple cartridge holder by gripping the orange lever.The staple cartridge is firmly held in place. When you remove the staple cartridge,you must pull the cartridge out with force.4. After removing the staple cartridge, check the inside of the finisher for any remainingstaples.5. Pull up the metal part of the staple cartridge.6. Remove the jammed staples and return the metal part pulled up in the previousstep to the original position.7. Insert the staple cartridge while gripping the orange lever until you hear it click intoplace.Ordering SuppliesXerox supplies, including staples, staple cartridges, and staple waste containers can beordered from Xerox by going to www.xerox.com and clicking on either the Contact Uslink for specific contact information/telephone numbers in your area or by clicking onthe Supplies and entering/selecting your specific machine information (product familyand model type). Below are the supplies you can order for both Advanced and ProfessionalFinishers:• Staple Cartridge (Advanced/Professional Finisher)• Staple Refills (Advanced/Professional Finisher)14-3Xerox® Color C75 PressUser GuideAdvanced/Professional Finishers
