Contents - user guide
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Product overview
- Bypass (Tray 5)
- Document feeder
- User Interface (UI)
- Print server overview
- Power on
- Exiting the Energy Saver mode
- High Capacity Feeder (Tray 6), 1-tray
- Advanced Finisher
- Professional Finisher with Booklet Maker
- GBC ® AdvancedPunch
- Standard/Booklet Maker Finisher
- SquareFold ® Trimmer Module
- Where to find help
- Submitting a print job
- Printing from the Xerox EX Print Server, Powered by EFI
- Paper and other media
- Loading tab stock in trays 1, 2, and 3
- Loading transparencies in trays 1, 2, and 3
- Loading pre-drilled stock in trays 1, 2, and 3
- Loading media in the Bypass tray
- Loading tab stock in the Bypass tray (Tray 5)
- Loading transparencies in the Bypass tray (Tray 5)
- Loading pre-drilled stock in the Bypass tray (Tray 5)
- Loading media in optional feeding devices
- Basic copy using the document feeder
- Basic copy using the document glass
- Copy tab
- Reduce/Enlarge More options
- Output Color
- Sided Copying
- Original Type
- Lighten/Darken
- Image Enhancement
- Color Balance
- Book Copying
- Sided Book Copying
- Image Shift
- Invert Image
- Original Orientation
- Output Format tab
- Covers
- Transparency Options
- Poster
- Watermark
- Face Up/Down Output
- ID Card Copy
- Job Assembly tab
- Sample Job
- Delete Outside/Delete Inside
- Basic scanning procedure
- Scan options
- Additional scan options
- Advanced Settings
- Layout Adjustment
- Filing Options
- E-mail Options
- E-mail
- Scanning to an e-mail address
- Network Scanning
- Network Scanning procedure
- Scan to PC components
- Store to Folder
- Save using the USB Memory Device (optional)
- Store to USB procedure
- Job Status
- Machine Status
- Faults tab
- Billing meters/usage counters
- User Account Billing Information
- Changing the paper tray attributes
- Maintenance
- Cleaning the exterior
- Cleaning the document feeder rollers
- Replacing consumable supplies
- Checking the status of CRUs
- Replacing a toner cartridge
- Replacing the toner waste bottle
- Replacing a drum cartridge
- Replacing the fuser
- Problem solving
- Document jams under the document feeder belt
- Lower left cover jams
- Main unit jams
- Paper jams in Trays 1-3
- Paper jams in the Bypass (Tray 5)
- Inverter jams (bottom right cover)
- Fault Codes
- General problems
- Other faults
- Hints and tips
- Preventing fuser damage
- Fuser width switch information
- Miscellaneous hints and tips
- Specifications
- Additional optional accessories
- High Capacity Feeder (1-tray HCF/Tray 6)
- Clearing paper jams in Tray 6 (1-Tray HCF)
- HCF (Tray 6) and lower left cover jams
- HCF (1 Tray) fault codes
- Oversized High Capacity Feeder (OHCF), 1 or 2 trays Trays 6/7)
- Loading media in the 1 or 2-Tray OHCF
- Loading transparencies in the OHCF (1 or 2 Trays)
- Loading pre-drilled stock into the OHCF (1 or 2 Trays) for 1-sided print jobs
- Loading pre-drilled stock into the OHCF (1 or 2 Trays) for 2-sided print jobs
- Skew adjustment levers
- Replacing the OHCF feed rolls
- Replacing the (OHCF) Bypass Tray feed rolls
- OHCF problem solving
- OHCF paper jams at lever 1a and knob 1c
- OHCF paper jams at lever 1b and knob 1c
- OHCF paper jams at lever 1d and knob 1c
- OHCF fault codes
- OHCF (Trays 6/7) specifications
- Advanced/Professional Finishers
- Loading Staples for the Advanced/Professional Finishers
- Staple Jam
- Finishing problems
- Interface Module
- Control panel
- Paper path
- Manual decurler buttons
- Paper jams at lever 2a
- Paper jams at lever 2b
- identifying the components
- hcs top tray
- unloading the stacker tray
- HCS entrance jams (E1, E2, and E3)
- HCS transport jams (E4, E5, and E6)
- HCS top tray jam (E7)
- HCS exit jam (E8)
- hints and tips for using the hcs
- Manual decurling feature on the finisher
- Folding feature
- Loading paper/tabs in Tray 8/T1 (Post-Process Inserter)
- Standard/Booklet Maker consumable supplies
- Replace the standard staple cartridge
- Replace the booklet staple cartridge
- Replacing the Staple Waste Container on the finisher
- Empty the Punch Waste Container
- Finisher problem solving
- Paper jams in Tray 8/T1 (Post-Process Inserter)
- Paper jams at lever 1a and knob 1c
- Paper jams at lever 1d
- Paper jams at lever 1b
- Paper jams at lever 3b and 3d
- Paper jams at lever 3e and knob 3c
- Paper jams at lever 3g and knob 3f
- Paper jams at lever 4b and knob 3a
- Paper jams at lever 2a and knob 3a
- Paper jams at lever 2b and knob 2c
- Paper jams at 2c, 2e, 2f, and 2d
- Paper jams at 2d and lever 2g
- Paper jams at unit 4 and knob 4a
- Paper jams at finisher top tray
- Paper jams at finisher stacker tray
- Paper jams at the optional booklet maker tray
- Stapler faults
- Staple jams in the standard staple cartridge
- Staple jams in the booklet maker cartridge
- Reinserting the standard staple cartridge
- Optional C/Z Folder
- Overview
- Identifying the components
- Square Fold feature
- Accessing the Square Fold options
- Trimmer feature
- Trim guidelines
- Accessing the Trimmer options
- Printing full-page images on booklets
- Follow these tips
- Clearing jams
- Clearing E3 jams
- Technical data
- Table Of Contents
- Table Of Contents
|
Loading pre-drilled stock in trays 1, 2, and 3...............................................4-4Loading media in the Bypass tray.................................................................................4-5Loading paper in the Bypass tray (Tray 5)....................................................4-5Loading tab stock in the Bypass tray (Tray 5).............................................4-6Loading transparencies in the Bypass tray (Tray 5)..................................4-7Loading pre-drilled stock in the Bypass tray (Tray 5)...............................4-9Loading media in optional feeding devices............................................................4-10Loading post-process media in optional finishing devices...............................4-10Loading tab stock with the GBC AdvancedPunch...................................4-105 Copy................................................................................................................5-1Basic copy using the document feeder.......................................................................5-1Basic copy using the document glass..........................................................................5-2Copy tab..................................................................................................................................5-3Reduce/Enlarge........................................................................................................5-3Reduce/Enlarge More options..............................................................5-4Paper Supply.............................................................................................................5-4Output Color.............................................................................................................5-5Copy Output.............................................................................................................5-52 Sided Copying......................................................................................................5-6Original Type............................................................................................................5-7Lighten/Darken........................................................................................................5-8Image Quality tab...............................................................................................................5-8Image Options.........................................................................................................5-8Image Enhancement............................................................................................5-9Color Effects..............................................................................................................5-9Color Balance.........................................................................................................5-10Color Shift...............................................................................................................5-10Layout Adjustment tab...................................................................................................5-10Book Copying.........................................................................................................5-112 Sided Book Copying........................................................................................5-12Original Size...........................................................................................................5-12Edge Erase...............................................................................................................5-12Image Shift............................................................................................................5-13Image Rotation.....................................................................................................5-13Invert Image..........................................................................................................5-14Original Orientation............................................................................................5-15Output Format tab............................................................................................................5-16Booklet Creation...................................................................................................5-16Covers.......................................................................................................................5-18Transparency Options........................................................................................5-22Xerox® Color C75 PressiiUser GuideTable of Contents
PreviousNext |