3. Load the paper/tabs, aligning it to the front side of the tray.a) If the paper is preprinted, load the paper with the printed side facing up.b) If the media is tab stock, load the tab side to be fed first (in the direction of thearrow as shown in the above illustration).4. From the Tray Properties window, enter the correct paper information, including size,type, weight, and if necessary, decurler and/or alignment optionIf enabled by your System Administrator, the Paper Tray Properties screen may bedisplayed on the UI.5. Select OK to save the information and close the Tray Properties window.MaintenanceStandard/Booklet Maker consumable suppliesXerox supplies, including staples, staple cartridges, and staple waste containers can beordered from Xerox by going to www.xerox.com and clicking on either the Contact Uslink for specific contact information/telephone numbers in your area or by clicking onthe Supplies and entering/selecting your specific machine information (product familyand model type).NoteAlways refer to www.xerox.com for the latest Customer Replaceable Units (CRUs) partnumbers.Store supply items and Xerox parts in their original packages in a convenient location.Supply Unit Shipped with finisher/Reorder QuantitySupply Item4 staple cartridges (5000 staples per cartridge) and 1staple waste container per cartonStaple cartridge/staple waste contain-er4 pack: 5000 staple refills eachBooklet Maker Finisher staple cartridge17-7Xerox® Color C75 PressUser GuideStandard/Booklet Maker Finisher
