17. Retrieve the copies from the output area.Sample JobWhen making multiple copies, you can continue making copies after making andexamining a sample set. You can choose to continue or cancel the job after confirmation.To print a sample of the job, perform the following:1. Press the Services button on the control panel.By default, pressing the Services button will cause the Copy screen to appear.2. Select Job Assembly > Sample Job.3. Select Sample Job On.4. Select Save.5. Load the documents in either the document feeder or on the document glass.6. Program the job with the desired features/options, including:• Reduce/Enlarge• Paper Supply• Output Color• Copy Output• 2-Sided Copying• Original Type• Lighten/Darken7. Enter the quantity.8. Press Start.One copy set of the job (the sample set) is printed and the remainder of the job isplaced on hold, and the machine is paused.9. If desired, change any applicable setting and copy quantity.10. Select either Start to finish the job or Cancel to stop the job.Selecting Start continues the copy process and the programmed number of sets willbe printed. Retrieve the copies from the output area.11. Upon completion, press the Clear All button on the control panel to return the settingsto their default state.Combine Original SetsThis feature allows you to copy sets of documents that cannot be loaded into thedocument feeder. This is useful when copying documents that may be damaged, rippedor torn, or too wrinkled to go through the document feeder. Combine Original Sets allowsyou to copy each original by placing it on the document glass and creating one copyjob for the entire set.1. Press the Services button on the control panel.By default, pressing the Services button will cause the Copy screen to appear.2. From the Job Assembly tab, select Combine Original Sets.3. Select either On or Off.Xerox® Color C75 Press5-30User GuideCopy
