Xerox Color C75 Press User Manual

Also see for Color C75 Press: System administration guide Specification Quick start guide

Contents

Xerox Color C75 Press User Manual Manual pdf 312 page image

Trimmer featureThe Trimmer feature can be selected/accessed from your computer print driver, themachine UI, or from the print server.NoteThe Trimmer feature is available only when your machine is connected to both a finisherwith a booklet maker and the SquareFold Trimmer Module.Trimmer optionsWhen using the Trimmer options, always consider the following:• Booklets exiting/leaving the SquareFold Trimmer Module may contain trimremnants/scraps from the previously trimmed booklet. This is due to static electricitybuild-up and is normal. If booklets contain trim remnants/scraps, simply remove anddiscard them.• The Trimmer feature can be switched on or off based on user preference. When thefeature is switched on, you can adjust the trim setting in 0.1 mm/0.0039 in. incrementsdepending on your requirements for the finished booklet job.NoteFor the remainder of this section, the machine UI screen is shown. The individual printserver and print driver screens are not shown. The descriptions given for each of theTrimmer options are applicable for network print jobs, and apply to any print server/printdriver connected to the machine.Xerox® Color C75 Press18-8User GuideSquareFold Trimmer Module