Here are two examples:• If the Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes,Sleep Mode activates after 60 minutes of total inactivity and not 60 minutes afterthe Low Power Mode begins.• If the Low Power Mode is set to 15 minutes and the Sleep mode is set to 20 minutes,the Sleep Mode activates 5 minutes after the Low Power Mode begins.NoteTo manually enter power saver, press the Energy Saver button on the UI.When logged on as administrator, the time periods for both Low Power and Sleep Modemay be set from Tools > System Settings > Common Service Settings > EnergySaver Settings.Exiting the Energy Saver mode1. Press the Energy Saver button, or2. Send a print job to the machine or make copies at the machine.Locating the machine serial numberThe machine serial number can be accessed from either the machine UI or by locatingit on the inside of the machine.1. Press the Machine Status button on the UI.2. Ensure that the Machine Information tab is displayed.The machine serial number is found here.3. The machine serial number can also be found on the serial number plate inside thefront door/cover of the machine.Feeding and finishing devicesAvailable with your machine is a variety of optional feeding and finishing devices. Thesedevices are briefly discussed on the following pages along with where to find specificinformation on each device.1-7Xerox® Color C75 PressUser GuideProduct overview
