5. Gently move Tray 6 back into position.HCF (1 Tray) fault codesIf an error caused the printing to end abnormally, or a malfunction occurred in themachine, then an error code is displayed. When an error code is displayed, all print dataof the machine as well as print data stored in the machine's built-in memory is discarded.NoteIf an error code appears that is not listed in the table below, or if an error persists afterfollowing the listed solution, then contact the Xerox Customer Support Center.024-955Cause: Tray 6 is empty/out of paper.Remedy: Add paper to Tray 6.024-974Cause: The designated paper size and size of paper in the tray differ when feedingpaper from the inserter.Remedy: Reset the paper or cancel the job.078-100Cause: (Optional) Paper Tray 6 malfunctioned.Remedy: Check the paper loaded in Tray 6. Power off and then power on the machine.If the tray errors are not fixed by performing the relevant remedy, contact the CustomerSupport Center.078-101Cause: (Optional) Paper Tray 6 malfunctioned.Remedy: Check the paper loaded in Tray 6. Power off and then power on the machine.If the tray errors are not fixed by performing the relevant remedy, contact the CustomerSupport Center.Xerox® Color C75 Press12-6User GuideHigh Capacity Feeder (1-tray HCF/Tray 6)
