4. Close the Inverter bottom right cover.5. If the finisher is installed, close the front door of the finisher.Fault CodesIf an error caused the printing to end abnormally, or a malfunction occurred in themachine, then an error code is displayed.If an error code appears that is not listed in the table below, or if an error persists afterfollowing the listed solution, then contact your Xerox Customer Support Center.If an error code is displayed, all print data of the machine as well as print data storedin the machine built-in memory is discarded.002-770Cause: Unable to process the job template due to insufficient hard disk space.Remedy: Remove unnecessary data from the hard disk to increase free disk space.003-750Cause: Unable to store any documents with 2 Sided Book Copy feature.Remedy: Check the 2 Sided Book Copy settings.003-751Cause: The machine is unable to process size, because the specified document areais too small.Remedy: Increase the resolution or scan area size.003-752Cause: When setting a mixed size document to Full Color/2 Side and attempting toscan at 600dpi, an error occurs.Xerox® Color C75 Press10-14User GuideProblem solving