Other faultsThis section contains a problem-solving table to help you locate and resolve a problem.Locate the defect in the Problem column and perform the task in the Corrective Actioncolumn.The machine does not successfully complete a copy job.Remedy:• Check that your machine is switched on. The screen on the control panel windowshould contain some information, or the Power Saver light should be illuminated.• Ensure that the power cable is connected to the machine and to a suitable powersocket.• When you have connected the power cable press the ON/OFF button.The machine does no successfully complete a print job.Remedy:• Is your machine connected on the network as a printer? Try printing a test pagefrom your workstation to the machine to verify that the printer is connected on thenetwork.• Try selecting the Network Scanning button. If the Network Scanning button is showingbut it is grayed out and non-selectable, try switching the machine off by pressingthe Power On/Off button. Wait for two minutes then press the Power On/Off buttonto restart the machine.• Network Scanning is not installed on your machine. Scanning options are availablefrom your Xerox Sales Representative.• Your machine may not be configured on the network. Contact your SystemAdministrator to connect the machine to the network.Image qualityResidual background on outputCause: Dark backgroundRemedy: Access and change the Original Type setting by selecting the Image Qualitytab.10-31Xerox® Color C75 PressUser GuideProblem solving
