Fault codes049-100Cause: There is a top tray sensor fault in the HCS.Remedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Carefully remove all sheets and paper scraps from jam clearance areas.049-101Cause: There is a top tray sensor fault in the HCS.Remedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Carefully remove all sheets and paper scraps from jam clearance areas.049-102Cause: There is a top tray sensor fault in the HCS.Remedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Carefully remove all sheets and paper scraps from jam clearance areas.049-104Cause: HCS bypass exit sensor faultRemedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Carefully remove all sheets and paper scraps from jam clearance areas.049-105Cause: HCS bypass exit sensor faultRemedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Carefully remove all sheets and paper scraps from jam clearance areas.16-11Xerox® Color C75 PressUser GuideHigh Capacity Stacker (HCS)
