2. Reinsert the container into the SquareFold Trimmer Module.3. Ensure that the container is fully pushed in, and that the indicator light is not lit.4. If fault persists, repeat the previous steps.5. If fault persists, power off/on the machine.6. If fault persists, call for service.013-941Cause: The Trimmer Waste Container is full or has a faultRemedy: Perform the following:1. Pull open the container and empty any trimmer scraps from it.2. Reinsert the container into the SquareFold Trimmer Module.3. Ensure that the container is fully pushed in, and that the indicator light is not lit.4. If fault persists, repeat the previous steps.5. If fault persists, power off/on the machine.6. If fault persists, call for service.013-943Cause: Booklet Tray on the SquareFold Trimmer Module is fullRemedy: Perform the following:1. Remove any booklets from the tray.2. If fault persists, power off/on the machine.3. If fault persists, call for service.Technical dataSpecificationsSpecificationsItem• Maximum: 13 x 18 in./330 x 457 mm• Minimum: 8.5 x 11 in./A4 SEFNoteThe SquareFold Trimmer Module requires both Interface Module and theBooklet Maker Finisher.Paper size• 5-20 sheet booklet (up to 80 imaged sides) at 24 lb./90 gsm• 5-25 sheet booklet (up to 100 imaged sides) at 200 lb./80 gsmCut amount: 2-20 mm, adjustable in 0.1 mm incrementsTrim capacity18-27Xerox® Color C75 PressUser GuideSquareFold Trimmer Module
