Contents - user guide
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Product overview
- Bypass (Tray 5)
- Document feeder
- User Interface (UI)
- Print server overview
- Power on
- Exiting the Energy Saver mode
- High Capacity Feeder (Tray 6), 1-tray
- Advanced Finisher
- Professional Finisher with Booklet Maker
- GBC ® AdvancedPunch
- Standard/Booklet Maker Finisher
- SquareFold ® Trimmer Module
- Where to find help
- Submitting a print job
- Printing from the Xerox EX Print Server, Powered by EFI
- Paper and other media
- Loading tab stock in trays 1, 2, and 3
- Loading transparencies in trays 1, 2, and 3
- Loading pre-drilled stock in trays 1, 2, and 3
- Loading media in the Bypass tray
- Loading tab stock in the Bypass tray (Tray 5)
- Loading transparencies in the Bypass tray (Tray 5)
- Loading pre-drilled stock in the Bypass tray (Tray 5)
- Loading media in optional feeding devices
- Basic copy using the document feeder
- Basic copy using the document glass
- Copy tab
- Reduce/Enlarge More options
- Output Color
- Sided Copying
- Original Type
- Lighten/Darken
- Image Enhancement
- Color Balance
- Book Copying
- Sided Book Copying
- Image Shift
- Invert Image
- Original Orientation
- Output Format tab
- Covers
- Transparency Options
- Poster
- Watermark
- Face Up/Down Output
- ID Card Copy
- Job Assembly tab
- Sample Job
- Delete Outside/Delete Inside
- Basic scanning procedure
- Scan options
- Additional scan options
- Advanced Settings
- Layout Adjustment
- Filing Options
- E-mail Options
- E-mail
- Scanning to an e-mail address
- Network Scanning
- Network Scanning procedure
- Scan to PC components
- Store to Folder
- Save using the USB Memory Device (optional)
- Store to USB procedure
- Job Status
- Machine Status
- Faults tab
- Billing meters/usage counters
- User Account Billing Information
- Changing the paper tray attributes
- Maintenance
- Cleaning the exterior
- Cleaning the document feeder rollers
- Replacing consumable supplies
- Checking the status of CRUs
- Replacing a toner cartridge
- Replacing the toner waste bottle
- Replacing a drum cartridge
- Replacing the fuser
- Problem solving
- Document jams under the document feeder belt
- Lower left cover jams
- Main unit jams
- Paper jams in Trays 1-3
- Paper jams in the Bypass (Tray 5)
- Inverter jams (bottom right cover)
- Fault Codes
- General problems
- Other faults
- Hints and tips
- Preventing fuser damage
- Fuser width switch information
- Miscellaneous hints and tips
- Specifications
- Additional optional accessories
- High Capacity Feeder (1-tray HCF/Tray 6)
- Clearing paper jams in Tray 6 (1-Tray HCF)
- HCF (Tray 6) and lower left cover jams
- HCF (1 Tray) fault codes
- Oversized High Capacity Feeder (OHCF), 1 or 2 trays Trays 6/7)
- Loading media in the 1 or 2-Tray OHCF
- Loading transparencies in the OHCF (1 or 2 Trays)
- Loading pre-drilled stock into the OHCF (1 or 2 Trays) for 1-sided print jobs
- Loading pre-drilled stock into the OHCF (1 or 2 Trays) for 2-sided print jobs
- Skew adjustment levers
- Replacing the OHCF feed rolls
- Replacing the (OHCF) Bypass Tray feed rolls
- OHCF problem solving
- OHCF paper jams at lever 1a and knob 1c
- OHCF paper jams at lever 1b and knob 1c
- OHCF paper jams at lever 1d and knob 1c
- OHCF fault codes
- OHCF (Trays 6/7) specifications
- Advanced/Professional Finishers
- Loading Staples for the Advanced/Professional Finishers
- Staple Jam
- Finishing problems
- Interface Module
- Control panel
- Paper path
- Manual decurler buttons
- Paper jams at lever 2a
- Paper jams at lever 2b
- identifying the components
- hcs top tray
- unloading the stacker tray
- HCS entrance jams (E1, E2, and E3)
- HCS transport jams (E4, E5, and E6)
- HCS top tray jam (E7)
- HCS exit jam (E8)
- hints and tips for using the hcs
- Manual decurling feature on the finisher
- Folding feature
- Loading paper/tabs in Tray 8/T1 (Post-Process Inserter)
- Standard/Booklet Maker consumable supplies
- Replace the standard staple cartridge
- Replace the booklet staple cartridge
- Replacing the Staple Waste Container on the finisher
- Empty the Punch Waste Container
- Finisher problem solving
- Paper jams in Tray 8/T1 (Post-Process Inserter)
- Paper jams at lever 1a and knob 1c
- Paper jams at lever 1d
- Paper jams at lever 1b
- Paper jams at lever 3b and 3d
- Paper jams at lever 3e and knob 3c
- Paper jams at lever 3g and knob 3f
- Paper jams at lever 4b and knob 3a
- Paper jams at lever 2a and knob 3a
- Paper jams at lever 2b and knob 2c
- Paper jams at 2c, 2e, 2f, and 2d
- Paper jams at 2d and lever 2g
- Paper jams at unit 4 and knob 4a
- Paper jams at finisher top tray
- Paper jams at finisher stacker tray
- Paper jams at the optional booklet maker tray
- Stapler faults
- Staple jams in the standard staple cartridge
- Staple jams in the booklet maker cartridge
- Reinserting the standard staple cartridge
- Optional C/Z Folder
- Overview
- Identifying the components
- Square Fold feature
- Accessing the Square Fold options
- Trimmer feature
- Trim guidelines
- Accessing the Trimmer options
- Printing full-page images on booklets
- Follow these tips
- Clearing jams
- Clearing E3 jams
- Technical data
- Table Of Contents
- Table Of Contents
|
7 Job Status.....................................................................................................7-1Job Status overview.............................................................................................................7-1Active Jobs tab......................................................................................................................7-1Completed Jobs tab............................................................................................................7-18 Machine Status..........................................................................................8-1Machine Status.....................................................................................................................8-1Machine Information tab.................................................................................................8-1Faults tab.................................................................................................................................8-3Supplies tab............................................................................................................................8-3Billing Information tab......................................................................................................8-3Accessing Billing Information............................................................................8-3Billing meters/usage counters...........................................................................8-4Usage Counters..........................................................................................8-4User Account Billing Information.......................................................8-5Tools tab..................................................................................................................................8-5Changing the paper tray attributes................................................................8-6Gloss mode................................................................................................................8-69 Maintenance...............................................................................................9-1Cleaning the machine .......................................................................................................9-1Cleaning the exterior.............................................................................................9-2Cleaning the document cover and glass.......................................................9-2Cleaning the document feeder rollers............................................................9-5Replacing consumable supplies......................................................................................9-6Ordering supplies....................................................................................................9-6Checking the status of CRUs..............................................................................9-7Replacing a toner cartridge................................................................................9-8Replacing the toner waste bottle..................................................................9-10Replacing a drum cartridge..............................................................................9-11Replacing the fuser..............................................................................................9-1710 Problem solving.....................................................................................10-1Paper jams............................................................................................................................10-1Document feeder jams......................................................................................10-1Document jams under the document feeder belt..................................10-4Lower left cover jams..........................................................................................10-6Main unit jams......................................................................................................10-7Paper jams in Trays 1-3.....................................................................................10-9Paper jams in the Bypass (Tray 5)..............................................................10-11Envelope jams in the Bypass tray..................................................10-12Xerox® Color C75 PressivUser GuideTable of Contents
|
