1. Auto button: When this indicator is lit, the appropriate curl correction is automaticallyperformed depending on the sizes and orientation of the printed output. The buttonshould be set to Auto for most situations. The button automatically switches to theAuto mode when:• The machine is switched on• The machine exits the Power Saver mode2. When this button is pressed and the downward curl indicator is lit, downward curlcorrection is performed on all printed output. If your output is curled downward,press this button to prevent downward curls.3. When this button is pressed and the upward curl indicator is lit, upward curl correctionis performed on all printed output. If your output is curled upward, press this buttonto prevent upward curls.NoteWhen no indicator is lit, the machine does not perform any curl correction to the printedoutput.Folding featureIf your machine is equipped with the Booklet Maker Finisher and/or the C/Z Folder, youcan make prints using the folding option. The option folds your prints in half (single orbi-folding) or in thirds (C-fold or Z-fold types). The folding option is selected from theprint driver.NoteIn order to use the folding option, the orientation of documents must be short-edgefeed (SEF). You must select a paper tray that contains SEF stock.Fold typesImportantThe Single Fold (Bi-Fold) option is available only with the Booklet Maker Finisher. TheC-Fold and Z-Fold options are available only with the C/Z Folder.These fold types are available:Xerox® Color C75 Press17-4User GuideStandard/Booklet Maker Finisher
