The booklet is assembled and stapled in the booklet area of the finisher; therefore, thebooklet enters the SquareFold Trimmer Module already assembled. Any adjustments tothe image of the original and its placement on the booklet page must be done from themachine UI, your print driver, or from the print server.NoteAlways refer to the SquareFold Trimmer Module Hints and Tips section before using theSquareFold Trimmer Module. The hints and tips section provides valuable informationabout setting up your jobs, which in turn ensures the best possible output for yourprint/copy jobs.You may want to run one or more test prints/copies before running larger jobs.Identifying the componentsMain componentsThe main components consist of:1. Top Left Cover: Open this cover to remove paper jams. The square fold mechanismis found in this area.2. Top Right Cover: Open this cover to remove paper jams. The trimming mechanismis found in this area.3. Booklet Output Tray: This tray receives square-fold booklet output from the finisher.4. Control Panel: The Control Panel consists of a mimic display, buttons, and variousindicator lights.5. Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open toremove and dispose of trimmer waste scraps.Xerox® Color C75 Press18-2User GuideSquareFold Trimmer Module
