Xerox Color C75 Press User Manual

Also see for Color C75 Press: System administration guide Specification Quick start guide

Contents

Xerox Color C75 Press User Manual Manual pdf 282 page image

NoteIf paper is torn, check inside the machine and remove it.4. Close the Right Cover on the finisher.NoteA message will display and the machine will not operate if the right cover is openeven slightly.Stapler faultsFollow the procedures provided when the output is not stapled or the staples are bent.Contact our Customer Support Center if the problem persists after you have tried thefollowing solutions. Stapler faults on output may look similar to the ones shown in thefollowing illustration.1. No staple2. Bent staple3. One side of staple rising up4. Staple bent in reverse direction5. Flattened staple6. Entire staple rising up7. Staple rising up with the center pressed inIf the output is stapled as shown in the figure above, contact our Customer SupportCenter.NoteDepending on the type of paper that is being stapled, the stapled nails may be bent. Ifthe bent nails are stuck inside the machine, they may eventually cause paper jams.Remove the bent staple when opening the staple cartridge cover. If you do not removethe bent staple, a staple jam may occur as a result. Use the staple cartridge cover onlywhen removing the bent staple.Xerox® Color C75 Press17-34User GuideStandard/Booklet Maker Finisher