8.5 x 11 in./A4 original was not enlarged onto an 11 x 17 in./A3 pageRemedy: Select a percentage for enlargement, or select the required paper tray andAuto % reduce/enlarge.Deformed transparenciesRemedy: Check to see if Transparencies are selected on the Paper Type screen. Themachine automatically adjusts for different types of media; paper can tolerate moreheat than transparencies.Output does not reflect the selections madeRemedy: If appropriate, select the button after each selection on the touch screen.Output is not stacked correctlyRemedy: Check to see if the paper tray guides are locked into position against thepaper.Pages in the set are not stapled or punchedRemedy:• Check to see if the paper tray guides are locked into position against the paper.• Select the option on the touch screen.• Check that there are staples in the staple cartridge.• Check that the Punch Scrap Container is not full.Drilled paper holes are on the wrong sideRemedy: Ensure that the drilled paper is loaded correctly in the paper tray, and thatthe holes are positioned as shown on the tray label.The touch screen is completely darkRemedy: Check to see if the machine is in Power Saver mode. Press the Power Saverbutton on the control panelThe touch screen is not bright enoughRemedy: Use the Brightness Dial on the left side of the control panel to adjust thebrightness of the touch screen.Documents will not feed correctlyRemedy:• If you are experiencing problems feeding certain types of documents, ensure thatthe document media is suitable for the document feeder. Check the documentspecifications.• Alternatively you can place the documents on the document glass.With an external control device connected the machine displays Ready to Copy, butusers cannot log inRemedy: Check the external device to ensure that it is properly connected and poweredon.Xerox® Color C75 Press10-30User GuideProblem solving
