Panasonic AV-HS6000 Operating Manual

Also see for AV-HS6000: Operation guide Firmware upgrade guide

Contents

Panasonic AV-HS6000 Operating Manual Manual pdf 86 page image

– 86 –Chapter 5 Basic Operations — Memory2 Select [Misc] in the [Register] column.f The [Misc] screen is displayed.[Protect]* Select a file icon and set this item to [On] to protect the relevant file. The protected file is not deleted even when [Delete]is selected.[Rename]* Select [Rename] after selecting a file icon to change the file name using the on‑screen keyboard.[Delete] Select [Delete] after selecting a file icon to delete the register memory. It cannot be deleted if [Protect] is set to [On].[Copy From]*Select the [Copy From] button after selecting the icon of an unregistered register memory, and then specify the registermemory to be the copy source using the on-screen numerical keypad.Ex) To specify the ninth register memory on the ninth page, input [9.9].[View] Fixed to icon display.[Page] Switches pages.[Close] Closes the [Misc] screen.* This function will be available in V2.00.00 or higher.Setting the operation of the multi‑selection panel areaTo specify the operation when a register memory is selected, use the button in the multi-selection panel area → [RECALL] mode.1 Select the button → [EVENT MEMORY] → [Register] tab.2 Select an item in [Direct/Next] in the [Select Panel] column.[Direct] Plays back the image when the register memory is selected.[Next] Plays back the image when the [PLAY] button is pressed after the register memory is selected.Setting details of event memoryThe settings of [Register] can be specified in further detail.The following figure shows the relationship between the settings of [Register] and the settings of [Detail Select].f In the following figure, two types of lines show the types of items.indicates an item to be selected in [Store]/[Recall] in the [Register] column.indicates an item to be set in the [Detail Select] tab.[ME1][DSK][AUX Sel1]: [All], [AUX1] - [AUX16][AUX Sel2]: [AUX1] - [AUX16][AUX Sel3]: [AUX1] - [AUX16][AUX Sel4]: [AUX1] - [AUX16][AUX Sel5]: [AUX1] - [AUX16]CBGD1CBGD2[XPT][AUX]Key1 Key2 Key3 Key4[Key XPT][A/B XPT][CBGD][Clip1][Clip][Clip2][Clip3][Clip4]BKGDBKGD[BKGD][Key1] [Key2] [Key3] [Key4][ME2]Key1 Key2 Key3 Key4Key1 Key2 Key3 Key41 Select the button → [EVENT MEMORY] → [Detail Select] tab.2 Select an item in [BKGD]/[Key1] to [Key4] in the [Detail ME] column.[On] Sets as a memory target.[Off] Does not set as a memory target.3 Select an item in [A/B XPT]/[Key XPT] in the [Detail XPT] column.[On] Sets as a memory target.[Off] Does not set as a memory target.