– 82 –Chapter 5 Basic Operations — Memory- When the same register memory page in the event memory is being played back- The same resource is being used in the shot memory and the event memoryr TimelineA timeline is a group of events which have been placed on the time axis.r Event points and edit pointsOn a timeline, the position where an event has been registered is called the event point, and the event currently being edited is called the current event.When the edit point is positioned between two event points, the event point before the edit point serves as the current event. (Event EMEM LINK in thefigure)Edit pointEvent n Event n+1 Event n+2r Event duration and total durationThe length of time up to the next event is called the event duration.The total of all the event durations is called the total duration.The present point in time on the timeline is called the current time.1s00f 1s00f 1s00fThe event progressesin this direction.The event stops.Total durationEvent durationCurrent timeEvent 1 Event 2 Event 3Displaying the timeline1 Select the button → [EVENT MEMORY] → [Edit]/[Play] tab.f On the top of the [Edit] tab and [Play] tab, the event memory timeline in the work memory is displayed.51 328 9 10 114671 Event point2 Executed bar3 Execution scheduled bar4 Displays the current event mark setting.Pause, Clip, GPO-Emem (omitted when [Off])5 Clip mark6 GPI‑OUT mark7 Pause point (displayed instead of the event point)8 Current event number/Total number of events9 Time to transition from the current event to the next event10 Time elapsed up to the edit point11 Total time of the event memoryNewly registering in the work memoryNewly register a timeline in the work memory.1 Select the button → [EVENT MEMORY] → [Edit] tab.2 Set [Edit] to [On] in the [Control1] column to enter the edit mode.f At this time, playback of event memory stops including EMEM LINK.
