– 64 –Chapter 5 Basic Operations — KEY4 Set [Left], [Top], [Right], and [Bottom] in [Trim Adjust1]/[Trim Adjust2].f Set the trimming value. The [Left] setting cannot exceed the [Right] setting (and vice versa), and the [Top] setting cannot exceed the [Bottom]setting (and vice versa).[Left] Sets the left trimming value.[Top] Sets the top trimming value.[Right] Sets the right trimming value.[Bottom] Sets the bottom trimming value.Setting the prioritySet the priority (image positioning). The default setting is as shown in the following figure.Background image[Key4]: [1st][Key3]: [2nd][Key2]: [3rd][Key1]: [4th]1 Select the / button → [MISC] → [Misc] tab.2 Select an item in [Key1] to [Key4] in the [Key Priority] column.f Select the priority for any key from [1st] to [4th].f Changing the setting of one item will change the settings of other items accordingly. In the default setting, if [Key1] is changed from [4th] to [1st],then the settings of [Key2] to [Key4] also change as follows.- [Key2]: [3rd] → [4th]- [Key3]: [2nd] → [3rd]- [Key4]: [1st] → [2nd]Setting [Key On Link]Combine [Key1] to [Key4] in the same ME to start transitions simultaneously.1 Select the / button → [MISC] → [Misc] tab.2 Select an item in [Key1] to [Key4] in the [Key On Link] column.f Select [Off] or [On] for any key.Example) When [Key1] and [Key3] are set to [On], and [Key2] and [Key4] are set to [Off]Pressing the button starts transitions of [Key1] and [Key3] at the same time.
