|
– 22 –Chapter 3 Part Names and Functions — Control Panel AV‑HS60C1/AV‑HS60C23 Source name display panels(This function will be available in V2.00.00 or higher.)Displays applications of the crosspoint buttons. The display settings of the source name display panels can be made from the button on thetop menu → [SOURCE NAME] → [Panel Name] tab. (page 119)When operating other than macro bus: “crosspoint number” on the upper line, “input source name” on the lower lineWhen operating macro bus: “macro name” on the upper line, “input source name” on the lower line4 PGM/A bus crosspoint buttons (1 to 24), PST/B bus crosspoint buttons (1 to 24)Selects the video signals of the PGM/A bus and PST/B bus.Use the <2nd PAGE>/<3rd PAGE> button to select 1 to 96. (page 22)f Bus mode can be selected from the button on the top menu → [OPERATE] → [Transition] tab → [Bus Mode] column → [Bus Mode].(page 46)5 buttonPress the to / to /// to buttons while holdingdown the button to switch the bus selection applications.Example) buttonWhen only the button is pressed, the KEY bus crosspoint buttons are switched to the source selector buttons of the AUX1 bus. Whenthe button is pressed while the button is held down, the KEY bus crosspoint buttons are switched to the source selectorbuttons of the AUX2 bus.6 <2nd PAGE>/<3rd PAGE> buttonsEnables the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, and PST/B bus crosspoint buttons to be used from 1 through 96.f The pages of the buses included in the corresponding ME can be switched at once. To switch pages at individual buses, assign the <2ndPAGE>/<3rd PAGE> button to the KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, and the PST/B bus crosspoint buttons. (page 118)Button status Displayed page<2nd PAGE> button <3rd PAGE> buttonOff Off First page (1-24)Lit Off Second page (25-48)Off Lit Third page (49-72)Lit Lit Fourth page (73-96)7 button(This function will be available in V2.00.00 or higher.)Enables/disables image effects (paint, mono colors, mosaics, defocusing, etc.) to be added to images selected at the PGM/A bus and PST/B bus.f The setting to enable/disable image effects to be added to images selected at the KEY bus can be made from the / button on the topmenu → [IMAGE] → [Key1]/[Key2]/[BKGD] tab → [Paint]/[Mono]/[Mozaic/Defocus] column. (page 73)8 Bus tallyIndicates the output status of the buses. The buses that comprise the on-air tallies will light up.Multi‑selection panel areaRECALLCLIP1REGISTERSTOREDEL121 Mode selection buttonSwitches functions that can be operated on the multi-selection panel. button*1 Selects background wipe preset. button Registers/recalls/deletes register memories of the shot memory. button*2Recalls register memories of the event memory. This button is also used to select register memories during EMEM-LINKtransition.f Registration/editing are performed using the menu. buttonRecords [CLIP1] through [CLIP4] (video memory) and [STILL1] through [STILL4] (still image memory) to the currentframe memories and plays them back.f When using the Storage Module AV-HS60D1 (optional), register memories can be registered/recalled/deleted on SSDinstalled in the Main Frame AV-HS60U1/AV-HS60U2. button*2 Used as a plug-in software menu.*1 Operations are limited in the version below V2.00.00.*2 This function will be available in V2.00.00 or higher.2 Multi‑selection menu panelWhen the mode selection button is pressed, the menu to be displayed is switched.For details, refer to “Basic operations for the multi-selection panel area” (page 36).
|
