– 135 –Chapter 8 System Menu — Setting the Control Panel AV‑HS60C1/AV‑HS60C23 Select an item in [Low Tally] in the [Select Button] column.f Set the color of the button not included in the on-air output (except Preset).f Besides the KEY bus crosspoint buttons, the PGM/A bus crosspoint buttons, and the PST/B bus crosspoint buttons, other buttons excluding Presetare also included.4 Select an item in [Preset] in the [Select Button] column.f Set the color for the Preset button.f Preset buttons other than the KEY bus crosspoint buttons, the PGM/A bus crosspoint buttons, and the PST/B buttons, are also included.Setting the colors when the buttons are turned offSet the buttons so that they will light dimly when they are turned off. The color of buttons that are turned off can be set at each block of Control PanelAV-HS60C1/AV-HS60C2.f Select a color from [ColorGroup1] to [ColorGroup8].1 Select the button → [CTRL PANEL] → [Button Color] tab.2 Select an item in [XPT]/[Select Panel]/[BKGD]/[Key]/[DSK]/[Common] in the [No Sel ME1]/[No Sel ME2]/[No Sel Other] column.f The applicable blocks of each item are as follows:- [XPT]: Crosspoint area- [Select Panel]: Multi-selection panel area- [BKGD]: Transition area- [Key]: Key operation area- [DSK]: DSK operation area- [Common]: Other buttons[Input]*1Sets [ColorGroup1] through [ColorGroup8] for each source from the button → [SOURCE NAME] → [PanelName] tab.f Sources (such as ME1PGM) that cannot be changed from the button → [SOURCE NAME] → [Panel Name]tab, are fixed to a white lighting.[ColorGroup1] to [ColorGroup8] Sets any of 8 types of color.[AssignableME]*2 Sets the button color to the ME color that was selected from the button → [MAIN FRAME] → [DSK] tab →[Config] column → [Assign].*1 Setting item only for [XPT] in the [No Sel ME1]/[No Sel ME2] column.*2 Setting item only for [DSK] in the [No Sel Other] column.Setting the brightness of buttons when they are turned off1 Select the button → [CTRL PANEL] → [Main Panel]/[SubPanel1]/[SubPanel2] tab.2 Set [Button Dimmer] in the [Brightness] column.f Set the brightness of buttons that are OFF.Setting the preset color of buttons when they are turned on1 Select the button → [CTRL PANEL] → [Color Group] tab.2 Adjust the color.f While looking at the lighting status of the buttons, set [R], [G], and [B] in the [Color Group1] to [Color Group8] columns.
