– 127 –Chapter 8 System Menu — System settingsReference(System standard)Approx. 0.3HLine synchronizer rangeInternally fixeddelayApprox. −0.3H to +0.7HApprox. 0.3H1H output(+1H)Output phase variable rangeH phase ([−0.50H to [0.49H])V phase ([−100H] to [100H])Line synchronizer rangeInternally fixed delayApprox. −0.8H to+0.2HShortestoutput(+0.5H)Approx. 0.2HOutput phase variable range+0.5HH phase ([−0.50H to [0.49H])V phase ([−100H] to [100H])Line synchronizer range Internallyfixed delayApprox. +0.2H to +1.2HLongest output(+1.5H)Approx. 0.2HOutput phase variable range+0.5H0H output(1F delay for Reference and in-phaseoutput) H phase ([−0.50H to [0.49H])V phase ([−100H] to [100H])Approx. 0.3HFrame synchronizer rangeInternally fixed delayWithin a max. of 1 frameOutput phase variable rangeH phase ([−0.50H to [0.49H])V phase ([−100H] to [100H])Reference(Reference phase)Phases and delay amount of input/output signals when HD format is usedImage effectsDown-converter[Delay][90H] ([75H]), [1F]Output signal 1Output signal 2Frame synchronizerInput signal[FS]:[Off], [Strict], [Acceptable][Mode]:[Normal], [U/C], [Dot byDot]** Not selectable when the system format is 720p.f For details on the frame synchronizer, refer to “Setting the frame synchronizer” (page 106).f For details on the down-converter, refer to “Setting the down-converter” (page 112).