Canon 3300 Series Manual

Contents

Canon 3300 Series Manual Manual pdf 49 page image

2Selecting the Sending Method 2-17Basic Fax UsageStamping Sent or Scanned Originals (Stamping Original)The machine can print a stamp about 1/8" (3mm) in diameter on the front side of scanned orsent originals. You can set the Stamp mode to differentiate scanned or sent originals.NOTE• Stamping originals can be set when the Feeder (DADF-H1) is attached.• When sending an original directly, you can set the machine so that the original is stamped eitherafter it has been sent, or after it has been scanned. (See ‘Setting the Stamping Conditions,’ on p. 5-33.)1 Place your originals in the feeder.For instructions explaining how to set the original, see ‘Sending an Original,’ on p. 2-7.2 Make sure the machine is ready to send, and press “Stamp.”A tick “ ” appears in the box to the left of “Stamp.”ABCABCVertical placement Horizontal placementPosition at whichstamp is appliedPosition at whichstamp is applied