Activity Management Reports and Lists9-2Appendix9Activity Management Reports and ListsTX Report/Error TX ReportThis report indicates the telephone number of the party to which you sent documents, theresult of communication, and so on, to enable you to check whether or not the documentswere sent correctly to the intended destination.You can set whether or not to automatically print a sending result report after sendingdocuments by Fax. (See ‘Setting Automatic Output of a TX Report,’ on p. 7-3.)You can also print a TX report with an image of the sent original attached to it. (See ‘SettingAutomatic Output of a TX Report,’ on p. 7-3.)NOTE• The default setting for printing of the TX report is “For error only. ”1 REPORT NAME When the sending of the documents is completed normally, a “TX REPORT” isprinted. When a sending error occurs, a “FAILED TX REPORT” is printed.2 MESSAGE A message describing the transmission result is printed.3 JOB NO. A 4-digit number, that is automatically assigned when the sending document isaccepted, is printed.4 DEPARTMENT ID If Department ID Management is set, the Department ID is printed.5 DESTINATIONADDRESSThe telephone number of the sending destination is printed to the first 20 digits.6 SUBADDRESS A subaddress is printed if one is specified.7 DESTINATION ID The name of the remote party is printed.TRANSMISSION OKJOB NO.DESTINATION ADDRESSPSWD/SUBADDRESSDESTINATION IDST. TIMEUSAGE TPGS.RESULT006403 3758 211103/05 13:4200’081OK03/05 2001 MON 13:43 FAX 035 4892 5997 . 001CANON✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽ ✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽TX REPORTTX Report
