1Things You Must Do Before Using This Machine 1-7Before You Use the Fax Functions• Sender’s Name (TTI)- The name registered as the user’s name is recorded.• Destination Name (See ‘Storing Various Dialing Functions,’ on p. 5-13.)- If you send an original using the one-touch speed dialing, coded speed dialing, or addressbook functions, and a name is registered as the sending destination, that name will berecorded.• Page Number- The total number of pages of the original is recorded.NOTE• You can set the machine so that the sending record is not printed, even if each item has beenregistered. (See ‘Attaching a Transmission Terminal ID to the Document Being Sent,’ on p. 5-5.)• If the machine is set so that the sending record is printed at the top of the recording paper on thereceiving side, and not all items are registered, only the registered items and the number of originalpages are printed.Selecting the Type of Telephone LineSet the type of telephone line connected to the machine.If this setting is incorrect, you will be unable to communicate with another machine, so besure to check the type of telephone line you are using and make the correct setting.NOTE• The default setting is “Tone.”1 Call up the desired screen as follows:2 Select the type of telephone line, and press “OK.”NOTE• Press “Cancel” if you want to cancel your selection.(AdditionalFunctions)Tel Line Type
