File Settings 5-49Setting and Storing Custom Fax Settings5Setting the Relay Memory BoxA Relay Memory Box is a memory box that enables documents received from a number ofparties to be relayed to specified destinations via this machine.You can set the relay start time, and relay the documents in the memory box all at one time.(See ‘Using the Relay Memory Box,’ on p. 3-11.)You can specify the following items for a Relay Memory Box.An asterisk (*) indicates the default setting.Setting item Set contents SettingMemory Box Name Sets the memory box name. Relay*You can enter up to 24alphanumeric characters.Password Sets a password to control the memory box.It is necessary to enter the password inorder to change the contents of the memorybox or to print documents received in thememory box, for example.Not requiredA one to seven-digitnumberSubaddress Sets an ITU-T standard subaddress. This isnecessary for distinguishing a RelayMemory Box from other memory boxes.RequiredNumbers, #, ∗, and spacescan be used (up to 20 digits).RX Password Sets an ITU-T standard password. If apassword has been set, the password addedto the received documents is compared withthe set password. If the passwords do notmatch, the documents are not received.Not requiredNumbers, #, ∗, and spacescan be used (up to 20digits).Relay Sending Destination Sets the destination to which the receiveddocuments in the memory box are to berelayed.Specify the destinationusing the Address Book orCoded Speed Dialing.Org. Relay Unit Restriction Sets whether or not to restrict the relaysource machines from which documentscan be received.On, Off*If “On” is selected, specifies the telephonenumbers of the relay source machines fromwhich you want to receive documents.Documents can only be received from theset relay source machines.Specify the destinationusing the Address Book orCoded Speed Dialing.Print RX Document Sets whether or not to print the receiveddocuments using this machine.On, Off*TX Relay Report Sets whether or not to inform the partiesfrom whom the documents were received ofthe results of relaying the documents toanother destination.On, Off*Relay Start Time Sets the starting time for relaying thedocuments. Once you make this setting, thedocuments in the memory box are relayedautomatically at the specified time.On, Off*
