2Selecting the Sending Method 2-15Basic Fax UsageNOTE• The transaction number is used for reference when checking the sending results, changingthe destination, or canceling sending. (See ‘Checking and Changing the Status of SendingJobs,’ on p. 4-2.)• If there is no response from the receiving fax or a transmission error occurs, the machine’sAutomatic Redial feature automatically attempts to send the document again. Under thedefault setting, Automatic Redial is carried out twice at two-minute intervals. (See ‘SettingAuto Redial,’ on p. 5-31.)• If you cannot send the document after the Automatic Redial, check the destination’stelephone number. Then place the original again, and resend it.• If you want to cancel sending or the standby status of a document that has been scanned,use the System Monitor screen. (See ‘Canceling Transmission,’ on p. 4-2.)Sending an Original While It Is Being Scanned (DirectSending)You can send the original directly, without storing it in memory.IMPORTANT• You can directly send an original of two or more sheets only when using the feeder.• If you cancel Direct Sending during transmission, the originals that have already been scanned aresent.1 Place your originals.For instructions explaining how to set the original, see ‘Sending an Original,’ on p. 2-7.IMPORTANT• When placing an original on the platen glass and sending it directly, you can only send oneoriginal at a time.2 Make sure the machine is ready to send, and press “Direct.”A tick “ ” appears in the box to the left of “Direct.”
