Selecting the Sending Method2-16Basic Fax Usage2NOTE• If you want to cancel Direct Sending, press “Direct” again.3 Set the sending conditions.For details of the sending conditions, see the following:- ‘Setting the Resolution, Density, and Image Quality to Match the Original,’ on p. 2-9- ‘Stamping Sent or Scanned Originals (Stamping Original),’ on p. 2-17- Chapter 3 ‘Special Fax Functions’4 Specify the destination.For details, see ‘Various Dialing Methods,’ on p. 2-19.IMPORTANT• You can specify only one destination at a time. You cannot specify simultaneous sending totwo or more destinations, such as Group Dialing.• Memory sending is automatically selected when Delayed Transmission or SequentialBroadcast Transmission is specified. When you send a number of originals from the feeder,the originals are sent while they are being scanned.5 Press (Start).As soon as transmission is possible, the original is scanned and sent while scanning istaking place.After the original has been sent, the display returns to the Fax Basic Features screen.During transmission, the transaction number, destination telephone number, and pagenumber currently being sent are displayed in the message area.When sending ends normally, is displayed in the message area forseveral seconds.After the original has been sent, Direct Sending is canceled automatically.NOTE• To cancel transmission, press “Cancel” or (Stop). Scanning and transmission ofdocuments are canceled from the time you cancel the transmission.
