Storing User Settings 5-5Setting and Storing Custom Fax Settings53 Press “Done.”The specified mode is set.Press “Done” repeatedly until the Fax Basic Features screen appears.Example: The stored standard key is displayed, as shown below.Attaching a Transmission Terminal ID to the DocumentBeing SentYou can specify whether or not to attach a transmission terminal ID when sending adocument. The transmission terminal ID is printed at the top of the sent document.Your telephone number, name, time, day, and date are printed, enabling the receiving partyto know who sent the document.IMPORTANT• In the United States, this setting must be “On.” Please see p. iv and p. 1-6 for details on FCC rulesgoverning the use of facsimile equipment in the United States.NOTE• If you set the transmission terminal ID to “On,” you can set the position that the transmission terminalID appears on the recording paper, and also set a telephone number mark.• The default settings are as follows:- TX terminal ID: On- Transmission terminal ID position: Outside- Telephone number mark: Fax1 Call up the desired screen as follows:Standard key(AdditionalFunctions)TX Terminal ID
