Setting the Output of a Communication Report7-6Printing Communication Reports and Fax Function Settings7Setting Automatic Output of an RX ReportThe RX report enables you to check whether or not the documents were sent correctly fromthe other party, and were received normally by this machine. A receiving results report canautomatically be printed after documents are received. You can also set the machine to printRX reports only when a receiving error occurs.NOTE• For an example of an RX report, see ‘Appendix,’ on p. 9-1.• The default setting is “Off.”1 Call up the desired screen as follows:2 Select the mode for printing an RX report, and press “OK.”“On”: Prints a report each time documents are received.“For Error Only”: Prints a report only when a receiving error occurs.“Off”: Does not print a report.3 Press “Done.”The specified mode is set.Press “Done” repeatedly until the Fax Basic Features screen appears.(AdditionalFunctions)(Custom Settings)RX Report