File Settings5-56Setting and Storing Custom Fax Settings5Setting the Batch Sending Memory BoxThe Batch Sending Memory Box enables you to send documents that have been read into it,to a specific destination at a specific time each day. (See ‘Using the Batch Sending MemoryBox,’ on p. 3-12.)By setting the sending time to a time when the communication charge is low, you can reducecommunication costs.You can specify the following items for the Batch Sending Memory Box.An asterisk (*) indicates the default setting.NOTE• If the party stored as the sending destination is not stored in the One-touch Speed Dialing memory,store it there.1 Call up the desired screen as follows:Setting item Set contents SettingMemory Box Name Sets the memory box name. Batch Sending*You can enter up to 24alphanumeric characters.Password Sets a password to control the memory box.It is necessary to enter the password inorder to change the contents of the memorybox or to read an original to the memorybox, for example.Not requiredA one to seven-digitnumberDestination Sets the destination of the documents in thememory box.RequiredYou can specify using theAddress Book and One-touch Speed Dialing.TX Start Time Sets the send starting time. The documentsin the memory box are automatically sent atthe specified starting time.RequiredNo default setting*(AdditionalFunctions)
