Setting the Output of a Communication Report7-4Printing Communication Reports and Fax Function Settings72 Select the mode for printing a TX report, and press “OK.”“On”: Prints a report each time documents are sent.“For Error Only”: Prints a report only when a sending error occurs.Off: Does not print a report.● When “On” or “For Error Only” is selected:To print a part of the document on the report, select “On” for Report With TXImage; select “Off” to print the report without including part of the document.3 Press “Done.”The specified mode is set.Press “Done” repeatedly until the Fax Basic Features screen appears.Setting Automatic Output of an Activity ReportThe Activity report is a list which enables you to check the results of sending and receivingdocuments. Activity reports can be set to automatically print when the number of transactionsreaches 40 (Auto Print), or to print with sent and received transactions separated (Send/ReceiveSeparate). You can also print an Activity report at a specified time (Daily Activity Report Time).NOTE• For an example of an Activity report, see ‘Appendix,’ on p. 9-1.• The default settings are as follows:- Auto Print: Off- Send/Receive Separate: Off- Daily Activity Report Time: Off1 Call up the desired screen as follows:(AdditionalFunctions)(Custom Settings)Activity Report
