Setting Transmission Functions5-30Setting and Storing Custom Fax Settings5NOTE• To cancel the setting procedure, press “Cancel.”3 Press “Done.”The specified mode is set.Press “Done” repeatedly until the Fax Basic Features screen appears.Setting the Pause TimeThis section describes how to set the pause time (in seconds).Some overseas dialing may not be successful due to the distance or complex route forconnections when you dial the international access code, country code, and the destinationnumber all together. In such cases, insert a pause after the international access code. Thenthe machine dials the number with a short waiting time where the pause is inserted, whichhelps improve the connection.NOTE• You can insert a pause on the Fax Basic Features screen. (See ‘Specifying Destinations UsingNumeric Keys,’ on p. 2-19.)• Pauses entered at the end of dialed telephone numbers are always 10 seconds long.• The default setting is “2 (sec).”1 Call up the desired screen as follows:2 Set the pause time using “-” or “+,” and press “OK.”The pause time must be from 1 to 15 seconds in one-second increments.You can also input the value using - (numeric keys).(AdditionalFunctions)Pause Time
