Setting the Output of a Communication Report 7-3Printing Communication Reports and Fax Function Settings7Setting the Output of a Communication ReportThis machine can automatically output a receiving/sending results report and a memory boxreceiving/sending report.NOTE• The Report Settings screen is made up of several screens. Use “▲” or “ ▼” to scroll to the desiredscreen and make the required settings.• When “▲” or “ ▼” should be pressed, the indication is displayed in this manual.Setting Automatic Output of a TX ReportThe TX report enables you to check whether or not the documents were sent correctly to theintended destination. A sending result report can automatically be printed after documentsare sent. You can also set the machine to print a TX report only when a transmission erroroccurs.NOTE• For an example of a Transmission report, see ‘Appendix,’ on p. 9-1.• The default setting is “For Error Only.”1 Call up the desired screen as follows:(AdditionalFunctions)(Custom Settings)TX Report
