Xerox DocuPrint N2125 Service Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide Service manual

Contents

Xerox DocuPrint N2125 Service Manual Manual pdf 80 page image

02/20003-6 DocuPrint N2125Solid Area Density, BackgroundInitial IssueImage Quality Repair Analysis ProceduresSolid Area DensityProcedureEnsure the printer is set for 600 dpi. Compare the solid areas on the System Controller TestPatterns with the Output Reference document (82P520) (Figure 1). The solid areas on theprint are at the 1.20 density square on the scale or higher, and all the solid areas on anyprint differ in density less than one density square.Y NThe solid area density is uniform.Y NGo to IQ RAP 12 Uneven Density.The prints are too faint.Y NThe prints are black.Y NGo to IQ RAP 11 Background.Go to IQ RAP 10 Black PrintsGo to IQ RAP 1 Light PrintsThe Solid Area Density is within specifications. Go to Background.Figure 1 Output Reference DocumentBackgroundProcedureCompare the Test Prints with the Visual Scale (82P284). The worst background area on anyprint should be at, or below, area 3 on the rating guide (Figure 1). The print is at the area 3 orbelow.Y NThe background is uniform.Y NGo to IQ RAP 12 Uneven Density.Go to IQ RAP 11 Background.The printed test patterns meet the Background specification. Go to Deletions.Figure 1 Rating Guide