Xerox DocuPrint N2125 Service Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide Service manual

Contents

Xerox DocuPrint N2125 Service Manual Manual pdf 122 page image

02/20004-22 DocuPrint N2125REP 3.6Initial IssueRepair-AdjustmentREP 3.6 Feed Clutch AssemblyParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Left Cover (REP 1.2).4. Remove the Front Cover Assembly (REP 1.6).5. Remove the Left Front Cover (REP 1.7).6. Remove the Left Plate Assembly (REP 1.11).7. Remove the Plate Handle (REP 1.12).8. Open Rear Door.9. Remove the Top Cover Assembly (REP 1.4).10. Remove the Right Cover (REP 1.5).11. Remove the LVPS PWB (REP 9.5).12. Remove the Paper Feeder (REP 3.1)13. Remove the four screws that secure the bracket to the Paper Feeder and remove thebracket (Figure 1).14. Remove the Gear 3 and Gear 2 from the shaft of the Paper Feeder (Figure 1).15. Remove the E-ring that secures the Feed Clutch Assembly to the Feeder (Figure 2).16. Disconnect P/J651 from the clutch (Figure 2).17. Remove the Feed Clutch Assembly (Figure 2).Figure 1 Paper Feeder BracketFigure 2 Feed Clutch AssemblyReplacement1. Reinstall the components in the reverse order.2. Ensure that all alignment pins are properly inserted in the bracket holes before replacingthe four screws.